Epoxy Polyester /hybrid powder coatingFor interior use with some indirect UV exposure or where much better color stability in varying cure cycles is desired. Achieving a good balance between Epoxy and Polyester, these coatings are ideal on display/store shelving and most indoor appliances.Application Areas:Home domestic appliance such as microwave ovens, refrigeratorsHome and office metal furniture, safety box, filing cabinetInstruments and apparatusTraffic vehiclesMedium industrial electrical trunkings, shelvings, light fixtures, machinery ect.Light fixtures, ceiling panels and switch boards.CURING CONDITIONS
180ºC/10-15minutes;200ºC/6-10minutes
AVERAGE COVERAGE
8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate)
Gloss&Texture&ColorSupper Matt(<10%), Matt(<30%),Sub-gloss(30%-50%),Semi-gloss(50-75%),Glossy(76%-85%),High gloss(>85%)Wrinkle/Sanded/Netted/Crackle/Crocodile/Hammer/Woodgrain/metallic/Pearl/AntiqueRAL color, Pantone colorsfull color range is availablePHYSICAL PROPERTIES
Suitable for interior use;
Good chemical resistance and mechanical performance.
Chemistry: Epoxy-Polyester
Particle size: Suitable for electrostatic spraying
Specific gravity: 1.2-1.7g/cm3 up to colorsGENERAL TYPESPolyesterpowder coatingEpoxyPolyesterPowder coatingAcrylic Powder CoatingPolyurethane powder coating
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating