Construction Nails, Iron Nail, Screw manufacturer / supplier in China, offering 21 Degree Round Head Zinc Galvanized Plastic Strip Nails for Framing Nailer, 103020c10 Flat Stitching Copper Wire, Nikema 80 Series Staple as Joiner for Furnituring and so on.
Min. Order / Reference FOB Price | |
---|---|
10 Piece | US $75.00/ Piece |
Local Area: | Jian, Jiangxi, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Type: | Finish Nail Gun |
---|---|
Usage: | Wood Packing.Wood Pallet |
Working Style: | Pneumatic |
(NT65) Pneumatic Angle Finishing Nailer
Packaging Details:CARTON BOXDelivery Detail:5~30 days as per your quantity
NameCoil Nailer NT65 (Aluminum body)Weight 2.04kgs Load Capacity 100 PCS Dimensions344mm x 82mm x 304mm(13-17/32" x 3-7/32" x 11-31/32")Load Capacity100 D.A.nailsOperating Pressure 70-120psi(5-8.5kgs/cm2) Fasteners Model15GA.34°Angle finish nailsFasteners Length 32mm-65mm Shank 1.8mmNails Head3.0 mm
No. SymptomProblemsSolutions1.1Air Leak Air leak in the cylinder cap when tools don't work 1.Loose head valve piston seal or o-rings .Check and replace the head valve piston set2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap Check and replace o-ring or cylinder cap gasket under the cylinder cap1.2Air leak in Trigger area when tools don't work1.Damaged o-ring in trigger valve Check and replace o-ring2.Damaged o-ring in trigger valve stem Check and replace o-ring3.Dirt in the trigger valveCheck and clean the trigger valve1.3Air leak in cylinder cap when tools are working 1.Damaged head valve piston o-ringsCheck and replace o-rings2.Damaged seal under cylinder cap Check and replace seal1.4Air leak in nose when tools are working 1.Worn or damaged bumperCheck and replace bumper2.Loose driver(piston unit) threadCheck and replace driver(piston unit) 1.5Air leak in Trigger area when tools are working1.Worn or damaged trigger valve headCheck and replace trigger valve head2.Damaged head valve piston o-ringsCheck and replace head valve piston o-rings2Failed to get driver(piston unit) back to the correct position completely.1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.Straighten the driver(piston unit) or verify driver guide(nose) and magazine 2.Worn or damaged nozzle Check and replace nozzle 3.The space between piston o-ring and cylinder is too tight.Check if the cylinder is adequate lubrication or replace the o-ring on the piston.3Work weakly and sluggishly1. Worn or damaged piston o-ring Check and replace piston o-ring 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings3.Dirt in the nozzleCheck and clean the nozzle4Tool jams frequently1.Damaged or Worn driver (piston unit)Check and replace driver (piston unit)2.Damaged or Worn driver guide (nose)Check and replace driver guide (nose)3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too bigCheck and replace driver guide cover 5Nail can not be shot1. Driver (piston unit) can't return to the correct position.Refer to no. 1 Symptom2.Driver guide(nose) can not match magazine wellCheck and correct the position between driver guide(nose) and magazine 3.Worn or damaged nail pusher compression spring Check and replace nail pusher compression spring
Contact Us: