American Model Co2 Fire Extinguisher (DOT Listed) 4.5kg
·DOT Listed.
·Material: Aluminum Alloy
·Suitable against class B.
·Polyester powder external coating (Red, Polished).
·All fire extinguishers are tested no leakage.
·Chemical Agent: Co2 gas.
·Working Pressure: 174Bar. Test Pressure: 250Bar.
·ISO 9001 certified quality management system, and CE approved
·Suitable against class B (flammable liquid) and live electrical fires
·All fire extinguishers must be serviced in accordance with BS5306
·Wall hanger hook or brackets are available
·Steel cylinder with corrosion resistant epoxy power paint finished.
·Brand name: Pri-Safety
Capacity2.3kg4.5kg(DOT)6.8kg9kg(DOT)Item No.AC-2.3AC-4.5AC-6.8AC-9Out-dia.(mm)Ф133Ф175Ф175Ф203Cylinder Length (mm)368445595620Cylinder Weight (kg)36.7812.5Extinguisher Weight (kg)6.112.515.522.8Volume(L)3.56.810.0313.5Filled Weight (kg)2.34.56.89Temperature Range-30+60ºC-30+45ºC-30+60ºC-30+45ºCWorking Pressure (bar)124169.3124169.3Testing Pressure (bar)207250207250MaterialAA6061AA6061AA6061AA6061Fire Rate343B70B89B89BPacking Size (mm)200x150x480310x185x540310x185x710350x215x730Qty./ctn (pcs)1111Qty./1x20'ft(pcs)1900900700500
Operations Instructions
1. Before attempting to fight a fire with a fire extinguisher it is important to check that it is fully charged (Fig. 1) and that the safety pin is not bent (Fig. 2)
2. Ensure you remain a safe distance from the fire and remove the safety pin (Fig.3) this will break the tamper seal
3. Aiming the extinguisher:
a) Solid Materials: Aim the hose at the base of the flames, moving across the area of the fire
b) Spilled liquids: Aim the hose at the near edge of the fire and with a rapid sweeping motion, drive the fire towards the far edge until all the flames have been extinguished
c) Flowing liquid: Direct the hose at the base of the flames and sweep upwards until all the flames have been extinguished
d) Electrical equipment: Switch off the power (if safe to do so) and then direct the hose straight at the fire
4. Squeeze the lever slowly to begin discharging the extinguisher, as the fire starts to diminish carefully move closer to it
5. Ensure all the fire has been extinguished, re-ignition can be possible when a powder fire extinguisher has been used