Thermocouple, K Type Thermocouple, Thermocouple Wire manufacturer / supplier in China, offering K Type Thermocouple Wire 500mm for Glow Wire Tester, High Pressure Ipx9K Waterproof Test Chamber, Thermal Shock Test Chamber Test Equipment and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Piece | US $5980.00/ Piece |
Local Area: | Shenzhen, Guangdong, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Max Diameter of Workpiece: | 1200mm |
---|---|
Mass Scope of Workpiece: | 20000kg |
Type: | Impact Testing Machine |
EN12600 Building Glass Pendulum Impact Test Device
Application:
Pendulum impact tester is use for the construction of glass, safety glass impact test, is to test the safety of glass in the same mass under the impact of different height under the impact of different penetration resistance or strength of a special device, its technology in line with GB9962, GB9963 standard The relevant provisions.
Production standards: GB9656, GB9962, GB15763, GB / T5137, GB / T9963, GB14681, GB17841, GB18045, GB / T11944 and other standards.
Technology Parameter:
Impact modePendulum styleSwing arm radiusabout 1960mmImpact height 190~1200mm(The height of the impactor relative to the specimen center line) adjustable Impactor weight 45kg±0.1kgLift control deviation0-30mmSample sizeabout H1938xW876±2mmRubber strip sizeW20±2mm thickness:10±1mm hardness:60±5IRHDSample Wooden frame internal dimensionsH1910xW847±5mmOuter fame size about W1066xD2760xH3100mmWeight about 750kgPower 1∮,AC220V,5AWire rope diameter3mm±0.1mmWire rope length≥1524mmMaximum impact height1200mm/2200mmImpactor trip MethodPneumatic Column Traction Tripping Height measuring elementOwn height poleFixed wayAnchor bolts fixedframe material Steel
Operation method:
1Remove the wooden frame clamp and remove the front wooden frame. Clean the front of the wooden frame.
2 upright into the test glass (high 1938±2mmX wide and 876±2mm), the bottom of the test glass placed along the bottom of the wood, the glass sample is located in the middle of the wooden frame and contact with the rubber strip.
3. Before loading the wood frame, the front wood frame rubber strips should be pressed against the test glass.
4. clamping the wood frame with a fixture, clamping force should be uniform.
5. in the console up or down to adjust the height, the standard impact height corresponding to 190mm, 450mm, 600mm, 750mm, 900mm, 1200mm.
6. impactor ear hanging into the release device pin, press the console up button to raise the shot pocket, to reach the test height, stop lifting.