Factory wholesale transparent hot melt glue sticks Adhesive/EVA glue sticks/silicone bar
Factory color hot melt glue sticks
Hot melt adhesive (HMA), also named as hot melt glue, it is a thermoplastic adhesive ,hot melt glue adhesive is widely used at daily life and packing production line, industrial, construction,shoes making. hot melt adhesive are various shape, they are pellets, granules, or glue stick. EVA based hot melt glue stick, Polyolefins based hot melt glue stick, PA based hot melt glue stick. the diameters are 7.2mm and 11.2mm , length can be 100mm, 200mm, 280mm,300mm or customized. hot melt glues main usage are as follows:
1.Assembly: Decorations/ Toys/ Handcrafts/ EPE Impact-absorbing materials/ Filler
2.Woodworking: cases, furniture sealing used,veneer,wood edgebanding.
3.DIY: Household parts assembly/ basic repairs/arts and crafts /homemade jelwelry.
4.Electronics: Wire fixing/ electronic components fixing / filling
5.Automobiles: component bonding / Wire fixing
6.Packaging: carton sealing, lamination carton sealing
7.filter pleated
Parameters:
Product Name
factory color hot melt glue sticks
Main Material
polyolefin, EVA, silicone,
Apperance
white or transparent
Viscosity(180ºC)
4000-10000(HG/T3660-1999)
softening point
83±5ºC(GB/T15332-1994)
Open time(25ºC)
6--8S(HG/T3716-2003)
Grade
ECO-friendly, FDA.low VOC
Valid time
12month(ventilation warehouse, avoid sunlight, temperature in 40ºC)
main used at
packing ,handcraft,paper gift box, carton, non-woven fabric,shoes, pc board,etc
Instruction for use:
1.operation temperature: 160-180°C
2. Application methods: roller
Notice:
1.Open time is changeable, depending upon the nature of the substrate, application temperature, thickness of adhesive applied, room temperature and closing pressure.
2.Do not touch the molten adhesive. In case of burns from hot adhesive, immediately flush skin with cold water and cover with a clean dressing do not remove adhesive. Have burn treated by a physician.
All surfaces should be clean and free of loose elements.
3.Do not heat the adhesive over 180°C in prolonged time to avoid material decomposition and consequent decreased properties.
4.Always keep containers tightly capped when not in use.
Note:
Product color may vary due to different raw material batch. This variation does not impact on product properties