Electronic Ballast for Low Frequency Induction Lamp Series:A: 220V Series (160V-265V 50/60Hz)B: 120V Series (100V-160V 50/60HzInstruments & Meters )C: 277V Series (160V-295V 50/60Hz)D: 480V Series (430V-530V 50/60Hz)E: Universal Input voltage Series (100V-295V 50/60Hz)F: DC12V, DC24V, DC36V, DC48V SeriesG1: Timing Dimmable Series 50%-100% (160V-265V 50/60Hz)
Features: The light works with 100% power for 5.5 to 6 hours after being electrified, then automatically changes to 50% power by the operation of the timing dimmer. After power cut and reset, it works the same way. These ballasts are mainly used for street lights to work with 100% power before midnight and with 50% power after midnight, which can save more energy.G2: Timing Dimmable Series 50%-100% (100V-160V 50/60Hz)
Features: The light works with 100% power for 5.5 to 6 hours after being electrified, then automatically changes to 50% power by the operation of the timing dimmer. After power cut and reset, it works the same way. These ballasts are mainly used for street lights to work with 100% power before midnight and with 50% power after midnight, which can save more energy.H1: Pull Switch Dimmable Series 50%-100% (160V-265V 50/60Hz)
Features: The light works with 100% power after being electrified, then automatically changes to 50% power by operating the pull switch. After power cut and reset, it works the same way. These ballasts are mainly used for street lights to work with 100% power or 50% power according to the requirement. The dimmer system can be controlled by operators at any time needed.H2: Pull Switch Dimmable Series 50%-100% (100V-160V 50/60Hz)
Features: The light works with 100% power after being electrified, then automatically changes to 50% power by operating the pull switch. After power cut and reset, it works the same way. These ballasts are mainly used for street liTransmitter ghts to work with 100% power or 50% power according to the requirement. The dimmer system can be controlled by operators at any time needHeating, Refrigeration & Temperature Control ed.I1: 0V-10V Dimmable Series 50%-100% (160V-265V 50/60Hz)
Features: The light works with 50%-100% power automatically according to the control of the voltage from 0V-10V. After power cut and reset, it works the same way. This ballast series is mainly used for intelligent street lighting control.I2: 0V-10V Dimmable Series 50%-100% (100V-160V 50/60Hz)
Features: The light works with 50%-100% power automatically according to the control of the voltage from 0V-10V.Insulation After power cut and reset, it works the same way. This ballast series is mainly used for intelligent street lighting control.J1: Light Control Dimmable Series 50%-100% (160V-265V 50/60Hz)
Features: The light works with 50%-100% power automatically according to the environmental illumination measured by the light sensor. After power cut and reset, it works the same way. This ballast series is mainly used for intelligent street lighting control.J2: Light Control Dimmable Series 50%-100% (90V-150V 50/60Hz)
Features: The light works with 50%-100% power automatically according to the environmental illumination measured by the light sensor. After power cut and reset, it works the same way. This ballast series is mainly used for intelligent street lighting control.
General Features:
Environmental temperature1. -15~+50 -25~+502. -35~+50 Tc< 80Frequency110KHz~250KHzRated input power> 100%Power factor> 0.98THD< 10%Thermal shutdown temperature≥ 110ProtectionAbnormalOther Bags & Cases operatingWarranty5 years (annual damage rate< 3%)Power compensation80W-400WShell materialAluminum
SHINUO LIGHTING Company Profile:
History: Established in 1998.
Products: LED lighting, Low frequency induction lighting, Fluorescent lighting.
Certificates: ISO9001, ISO14001, CCC, CE, UL, FCC, DLC.