GRL-20 20L Chemical Machinery Manual Lift Distillation Vacuum Lab Rotating Glass Reactor
Applications:
Speed-regulation glass reactors are mainly used for synthetic reaction, distillation and concentration of different types of materials. We have single wall, double wall and triple wall glass reactors. The reactor can be pumped to a negative pressure state according to some experimental requirements. A constant pressure funnel or an adjusting valve on the feeding bottle Circulating liquid can be filler into the jacket to heat or cool materials inside. Triple wall glass reactor with two jackets, the inner jacket is for circulating liquid, and the outer layer should be pumped to vacuum condition for thermal insulation.
Advantages:
High borosilicate glass has good physical and chemical properties.
Wide working temperature range: -80ºC to 200ºC.
It can work under normal pressure and negative pressure, its vacuum degree can reach to 0.098Mpa.
The vessel can withstand the pressure range from -0.1MPa to 0MPa.
Teflon (PTFE) and FV rubber material cock or discharge valve; Sealing together with PTFE covered O ring.
For GRL series glass reactor, the reaction vessel and the lid can be separate, the glass vessel can be lifted up, and can be angled 120 degree both sides, which makes it more convenient to operate and clean.
Openings are Sealed with flanges, ensuring higher vacuum degree, easy to disassemble.
ModelGRL-20Electrical Requirements1~,220V,50/60HzGlass PartsGlass Vessel Capacity 20LCooling/Heating Jacket Capacity 6LJacket Cooling/Heating Surface0.32 m²Condenser Cooling Surface 0.26 m²Glass TypeFood grade borosilicate 3.3Allowable Temperature Rang-80~200ºCWorking Pressure -0.1 MPa~Ordinary pressureVessel HeadDomed with 6 openings6 OpeningsOpening for Stirring Shaft50# FlangesOpening for Temperature Sensor24# standard Ground MouthOpening to Connect Condenser50# standard Ground JointOpening to Feed Liquid Material34# standard Ground MouthOpening for Constant Pressure Funnel40# standard Ground JointOpening to Feed Solid Material80# FlangesStirring PartsMotor Power90 WControllerDigital controller with variable frequencyRotation Speed0~500 rpmStirring ShaftPTFE covered stainless steelAgitator4-blade multi-paddleLifting FunctionManual LiftTo be lifted by a foldable hand wheelLifting distance390mmUnique FeatureThe glass vessel can be angled from 0~120°Drain Valve1. Flush seal design with large opening and flat flange clamp
2. 585mm Above FloorInlet/Outlet DN15 FlangeVacuum Sealing PTFETemperature SensorFluorine covered stainless steelSupporting frameStainless Steel 304MovableEquiped with swivel casters and lockDimensions(mm)1100Lx655Wx2030H
Our Service