Garlic machinery garlic root cutting machineI. equipment parameters:
NameTypeSpecification (mm)MaterialVoltage (v)Garlic root cutting machineRd-SQG5000-25000*850*1450Stainless steel380v
II. Operation instructions:
1. The machine must be ground wire.
2. Check whether there is any debris between the chain and the material cup before starting up, so as to ensure that no sundries are turned on, so as to avoid damaging the parts.
3. Powered by rotary cutting first start, after waiting for rotary cutting blades rotating normal again started in the transmission, and then put the garlic root without dirt block on on the material cup, garlic in transmission chain under the drive of automatically cutting root.Caution: do not extend your hand to the gap between the cup and the cup to avoid injury.
4. Press the stop to stop when the machine stops, and then press the end of the garlic on the waiting cup to avoid the blade.
5. According to the standard garlic adjustment, if the garlic is too large or too small, it needs to be adjusted according to the specific situation.III. Maintenance instructions: check the cleaning, must stop the power off, in case the saw blade hurts.
1. Bearing, chain and butter;
2. Check whether the screws are loose;
3. Clean the saw blades and wash them with brush or wet cloth.If there are too many impurities in the transmission chain, the water source can be attached to the PVC pipe that is installed under the bin, and the valve shall be opened to flush the impurities in the chain and cup holder.
4. Saw blade and triangular belt are vulnerable parts. If there are wear and tear, replace them in time.
5. The local guarantee for 3 months, vulnerable parts and man-made damage are not covered by the warranty.IV.If you want to know more about the device, or if you have any questions, you can call or email for consultation.If you are convenient, you can also visit the company.We can also modify the product or increase the corresponding function according to the customer's requirements.