This lathe meets the special requirements of users in the petroleum, geological, mining and chemical industries, and in agricultural irrigation and drainage, it is able to cut various straight and taper pipe threads of union joints, drill rods, casting pipes, drain pipes, well castings and warter pump pipes more economically and efficiently as compared with the engine lathe, however, it may serve as an engine lathe to cut various metric, withworth and module threads, shafts and disks.
1. The machine is equipped with a tapering unit which can work out a ±1:4 taper.
2. It is able to cut both metric and threads without changing the translating gear.
3. The dripping worm in the apron can protect the mechanisms of the lathe automatically.
4. The guide way is hardened and finely finished.
5. The geat power of the machine is competent at heavy load and power cutting.
6. The floor center rest can be moved freely as required by the user.
7. The center rest is provided with an adjustable clamp unit for long pipes, greatly reducing intensity of labor.
8. The double 4-jaw chucks offer free clamp of both short and long pipes.
ModelQ1350Bed width750mmTurning diameter over bed (max.)1200mmTurning diameter over carriage (max.)705mmMax. diameter of pipe (manual chuck)510mmTurning length (Max.)1700mmSpindle bore520mmSpindle speed steps9 stepsRange of spindle speed6-205 r/minInch threads (T.P.I)28-2/22Metric threads(mm)1-15/23Main motor power22kwMachining length of taper scale1000Rapid travel of tool post6000mm/min