Chair And Bed Fall Prevention Device Patient Sensor Alarm
Mold: PA-50-1
Features
Front:
Test & Tone Button:
1) Press button to test. Alarm will sound for 3 seconds then automatically shut off to ensure proper
functioning.
2) Press for 3 seconds, alarm tone switches between Alarm 1 - Alarm 2
Reset & Volume Button
1) Press button to reset.
2) Press for 3 seconds, alarm volume switches between Hi - Low.
Side:
Sensor Pad
Cable Relief
LED:
Test, red light
Low battery, yellow light
Alarm ring, red light
How to Use
1)Set the desired alarm and tone setting
2)Attach the monitor to the desired location using the back clip working with socket
3)Plug the sensor into the alarm monitor.
4)Place the sensor pad on the chair/bed or the magnet / buckle belt on the patient so it is firmly in place.
5)The alarm is activated when the patient moves from the sensor pad or opens the sensor belt. To reset the alarm monitor, either reset the monitor, or place the patient back on the sensor pad / re-fasten the sensor belt.