Powder Coating Equipment (Colo-500-STAR
Powder coating gun, powder coating machine, powder coating system, powder coating equipment, powder coating control unit
The process of the powder coating is like this: The powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns. The guns spray a powder/air mixture onto the workpieces.
Configuration: Powder gun *1 + powder pump*1 + powder container*1 +trolley*1 + oil-water separator*1 + air pressure regulator*1 and other hose with accessories.
Technical data:
Mains input voltage: 220V/110V
Operating frequency: 50Hz /60Hz
Powder: 50W
Output voltage (to the gun): 0-100KV ( adjustable)
Maximum output current (to the gun): 180UA(max)
Protection type: IP54
Approvals: CE Certification
Pneumatical data
Input pressure: Min. 6 bar(87PSI)/max. 10 bar(145PSI)
Recommended input pressure: 7 bar(101.5PSI)
Max. Water vapor content of the compressed
Air 1.3 G/M³
Max. Oil vapor content of the compressed air 0.1 mg/m³
Packing Dimensions
Carton size: 68X52X84cm G. W: 37kgWe supply:
Powder spray gun spare parts
Test powder coatng gun
Electrostatic powder painting
Electrostatic powder coating
Electrostatic powder spraying machine
Manual Powder Painting System
Electrostatic Powder coating machine
Powder painting machine
Powder spray gun
Electrostatic powder spraying machine
Electrostatic powder coating