Technical Parameters
ParametersModelRX-1(0.5T)RX-2(1T)RX-3(2T)RX-03RX-05Center height10001000100012001200Faceplate diameter200260300300400The main11001100130013001300Spindle speed0-1800-1000-800-500-30Line length10001200125013001300Maximum load5001000200030005000Motor power345.55.57.5Dimensions2500x600x14002800x600x14002800x600x14003600x690x15004000x700x1600Power supplyThree-phase four-wire380vSpeed control modeFrequencyCounting modeSix digital display (forward and reverse automatic judgment count)The weight of the equipment35050080012001500
Product Features
1.The mechanical transmission part of the winding machine is set in the bedside box, and the transmission part is installed on the operating side of the bedside box. High and low spindle speed change with variable speed handle
2.The winding machine uses a frequency converter to achieve stepless speed regulation, smooth starting and constant torque.There are three positions for adjusting the shifting handle: low speed, neutral, high speed; set the number of laps, and automatically stop.
3.The machine is equipped with an automatic brake device to prevent reverse when the winding is stopped.
4.The machine can preset the number of coil turns to control the forward and reverse rotation; the electronic reversible counter has a forward and reverse counting accuracy of 1/10 turns, and has a power failure memory function.
5.The button station is controlled centrally, and the start and stop of the spindle faceplate is controlled by a foot switch or a key
Detail images