Application
2X Sliding Vane Rotary Vacuum Pump is one of the basic equipment for obtaining vacuum for airtight containers by exhausting gas. It can be used alone, or used as the fore pump in front of the booster pump, diffusion pump, molecular pump, etc. This pump is applicable to the vacuum metallurgy, vacuum welding, vacuum impregnation, coating, vacuum drying, as well as the vacuum treatments in chemical and pharmaceutical industry, electric vacuum devices and other industries.Notices
1. The pump can work within the ambient temperature range of 5~40 and under the inlet pressure less than 1330PA. It is also allowable for long-term continuous work.
2. The pump is neither applicable to pump the gases which have excessive oxygen content, poisonous and explosive feature, corrosive effects to etals and chemical reactions with oil of pumps, and dust particles, nor act as a transfer pump to transfer gas form one container to another.
3. The continuous working hours of the pump under the inlet air pressure of 6000PA shall not exceed 3min to avoid damages caused by oil injection or bad lubrication.SpecificationsModel2X-4A2X-8A2X-82X-152X-30A2X-70A(L/S)
Pumping Speed488153070(≤ Pa)
Ultimate Pressure≤ 6x 10 -2(kw)
Motor Power0.551.11.12.23Pneumatic Tools 5.5(Degrees C)
Temperature Rise≤ 4 Degrees CdB(A)
LW Noise≤ 75≤ 78≤ 78≤ 80≤ 82≤ 86(mm)
Inlet DiameterΦ 25Φ 25Hand Tools Φ 40Φ 40Φ 65Φ 80(rpm)
Rotational Speed450550320320450420(L)
Injection Amount of Oil0.70.922.824.2(cm)
Size55x 34x 4155x 43x 4479x 43x 5479x 53x 5478x 50x 5691x 65x 70Surveillance, Control & Protection (Kg)
Weight5470135196240428