High Quality Pvc Fast Speed Roller Shutter DoorThe description and specification of doors as following:Control systemsMitsubishiInverter0.75/1.5KW, PLC and other components.Dynamical systemNordMotor,0.75/1.5KW, 220V/380V. Incorporating limit switches for open and close cycles
Adopt special high speed motor reducer and this drive unit can be used on manual in the event of power failure.Door Constructionframework:Stainless SteelRolling shaft: In 2mm thickness cold-roll steel tube with machined blocks at each and incorporating high-speed bearing.Cross bar: In aluminum lath(Increase Wind-load ability).Curtain: Use high-density poyester fabric0.8mm thickness
Self-extinguishing rate: DIN4102
Windows: Transparent PVC sheet 1.5mm thickness
Color:To be confirmed(Yellow, Green, White, Blue, Orange, Red, Grey as optional)Command systemPush ButtonSafe systemPhotoelectric sensor (Door will not close if there is people or other object under door)
Emergency stop protection
Safety Edge BottomTechnical ParameterPower supply: 100V AC-15% to 250 VAC+10%; 50/60Hz
Power consumption: Max -250W
Opening &Closing speed:0.7~1.2m/s
Opening &Closing frequency: 1000-1500 cycles/day
Wind load: 15 m/s
Working temperature:-10ºCto +50ºCNordmotor data parameter0.75 KW Rating: S1 IP: 55 Ins: F
V Hz Ar/min
220△50 3.80 1380
380Y 50 2.20 1260
CosΦ: 0.73
Speed ratio: 10.91
Brake Voltage: 220V
BrakeTorque: 10
Torque:50 NM